China 2017s best price hydraulic aerial platform truck for sale

Chengli Special Automobile Co., Ltd. is the leading manufacturer and supplier of aerial working platform truck in since 2004s. With many years’ experience in producing, we could supply 10m-22m overhead working trucks including ISUZU bucket truck, dongfeng aerial working platform truck, JMC high altitude operation truck, forland bucket truck, etc. More information, please feel free to contact with Ms. Anita Deng.

As far as we know, the working height of the high altitude operation trucks is from 3m-50m. However, the hot sale ones are the 14m overhead working truck and the 16m bucket truck, especially, electric power industry. Usually, the height of the road lamps is 7m-8m, and the higher ones with 12m, so the 14m high altitude operation truck is perfect. But not every client know these. So when they decide to purchase the aerial working platform truck, they don’t know how to choose, the 12m, 14m, or 16m. So confused. Anyhow, let Anita Deng from Chengli Special Automobile Co., Ltd. suggest you the 14m dongfeng aerial working platform truck as below.

Dongfeng double rows high altitude operation truck, is with the working height of 14m, and the max working height up to 16m, 3300mm wheelbase, chaochai 95hp diesel engine. The total mass of the aerial working platform truck is 5,000kg. 7.00R16 14PR tyre, and the overall dimension: 7,400*1,980*3,100(mm).
More pictrues of hot sale dongfeng 14m overhead working platform truck as below. 

JMC brand aerial platform truck for sale 

ISUZU 4*2 14-16m aerial working platform truck for sale 

Dongfeng 20m3 hydraulic bucket truck for sale 

JAC brand 14-16m high altitude operation truck for sale 

And actuallty this dongfeng high altitude operation truck can be designed and produced as 12m, 14m, 16m, etc. However, for the electronic power industry, the 14m bucket truck is enough. Dongfeng 14m high altitude operation truck is with 4 sets of H shape hydraulic outriggers, which can be elevating at the same time or independently. The outriggers and the working arms are interlocked, avoiding over operation, assuring the safety and reliability when operation. The high altitude operation trucks manufactured by Chengli Special Automobile Co., Ltd. can be operated up-down, choosing to install crane with the max loading capacity of 1,000kg. The working arms of CLW overhead working truck is with 3 sections knuckle boom, 360 degree full rotation, etc.

Chengli Special Automobile Co., Ltd. is the leading manufacturer and supplier of high altitude operation truck in China since 2004s. With many years’expericne in producing, Chengli Special Automobile Co., could produce and sell 12-14m aerial working platform truck, 14-16m overhead working truck, 16-20m high altitude operation truck, 20-22m hydraulic aeria lifter vehicle, etc. And we Chengli Special Automobile Co., Ltd. could sell ISUZU aerial working platform truck, Dongfeng high altitude operation truck, JMC overhead woking truck, forland high altitude operation truck, JAC aerial working platform truck, etc. More information, please feel free to contact with Ms. Anita Deng.

Website: www.truckdf.com

Email: szhj9999@163.com 

Mob.: +86 13886878855

Whatsapp/Wechat: +86 13329899995

Skype: truck0011

QQ: 504873236 

ASME LPG gas trailer for sale, Whatsapp: +86 13329899995

50cbm poultry feed trailer for sale, Whatsapp: +86 13329899995

5-6tons poultry feed truck, Whatsapp: +86 13329899995

hydraulic poultry feed truck for sale, whatsapp: +86 13329899995

How to operate CLW brand hydraulic poultry feed truck?

The bulk feed tank delivery truck manufactured by our company is a kind of special transportation vehicle refitted on the second type chassis or the cargo trucks clients offered, then choosing the high quality and high strength carbon steel, welded the tank; equipped with electronic auger discharging system. Bulk feed tank is made up of chassis, loading feed pellet tank, discharging auger system and electro hydraulic operation system, etc.
 
Bulk feed delivery truck is main used for delivering, loading and discharging of feed pellets of different feed factories, large-type poultry farms, and also for transporting some non-corrosive feed pellets, such as pellets from pharmaceutical factory and turnover of grain depots, etc. the feed trucks manufactured by Chengli Special Automobile Co., Ltd. can transporting various feed pellet with the different compartments, the dream transporting vehicles for poultry farms and feed factories.
How to operate CLW brand hydraulic feed truck?
 
DO you know how to operate the hydraulic feed truck?
 
Nowadays, more and more livestock and poultry farms would like to buy feed truck for their plants. If there is 380 volts three phase, then electronci feed truck will be your best choice. And if there is no 3 phase 380volts, then we can choose hydraulic feed truck. More and more people perfer to hydraulic system discharging feed trucks.
 
Chengli Special Automobile Co., Ltd. Is the leading manufacturer and supplier of feed trucks in China. With many years’ development, we Chengli Company can manufacture and sell farm-oriented feed trucks(electronic system discharging or hydraulic system discharging) from 8m3 to 40m3 and 40m3-50m3 animal feed transported semitrailer, etc. And more and more CLW Brand feed trucks have been exported all over the world.

More pictures of hot sale hydraulic poultry feed truck manufactured by Chengli Special Automobile Co., Ltd. as below 

dongfeng 20m3 hydraulic discharging poultry feed truck for sale 

    dongfeng tianjin 4*2 8-12tons livestock and poultry feed truck for sale

 dongfeng 16m3-22m3 farm-oriented and poultry bulk feed delivery truck for sale

       hot sale 40m3 hydraulic system discharging animal feed delivery truck

 dongfeng duolika 12m3 hydraulic discharging poultry feed truck for Phillippines

                          best price 15tons hydraulic farm-oriented feed transported truck for sale 
Today, we will introduce how to operate hydraulic feed truck as below
 
I think there are three steps to finish.
First step, operation of the driver cab.
Second, operation at the left toolbox
Third, operation at the rear part of the truck

First, at the driver cab.
A, start the truck; B, step on the clutch; C, Open the PTO

Second, at the left toolbox operation

We should know the function of the 5 shafts above.
The left one with red color is hand throttle(push-up to accelerate the engine); and the right 4 ones are remarked with 1, 2, 3, 4 above.
1 shaft is to control the top auger lifting and dropping. Push-up the 1 shaft refers to lifting function; then pull-down refers to dropping the top auger.
2 shaft is to control the top auger left-right rotating. Push up the 2 shaft refers to right rotation; then pull-down refers to left rotation.
3 shaft is to control auger at the tank bottom to rising and discharging. Push-up refers to lifting the feed, only in forward-rotating.
4 shaft refers to control the top auger feeding. Push-up refers to feeding, only in forward-rotating.
And the operation steps of the toolbox as below
A, push up the 1 shaft to lift the top auger;
B, push-up and pull-down 2 shaft to left-right rotation, then find the place of the feed silo
C, push up the 3 shaft to lifting the feed
D, push up the 4 shaft to feeding the feed to the feed silo
E, push-up the manual throttle; if the truck operate so hard then accelerate the manual throttle.
Then if close the truck, first close the manual throttle, then 4-3-2-1

Last the operation at the rear part of the truck.

The 2 sets of the operation manual shaft to open the compartments of the feed truck
1 refers to the compartment 1; 2 refers to compartment 2. discharging one by one. The upper part means close the compartment, close position.

Pull-down operation shaft to discharge feed gradually one by one.

If  close the feed truck, then close in reverse.

Chengli Special Automobile Co., Ltd. is the leading manufacturer of bulk feed delivery truck, animal feed tanker truck in China since 2004s. With many years’ development, the animal feed tanker trucks manufactured by Chengli Special Automobile Co., Ltd. are with simple structure, reliable performance, large delivery amount, easy operation, etc. suitable for feed transporting of different sizes farms. More information, please feel free to contact with Ms. Anita Deng.
Website: www.truckdf.com
Mob.: +86 13886878855
Email: szhj9999@163.com
Whatsapp/wechat: +86 13329899995
Skype: truck0011
QQ: 504873236 

2017s new design skid lpg gas station with auto lpg gas dispenser, Whats...

DONGFENG 14-16m hydraulic bucket truck for sale, Whatsapp: +86 13329899995

CLW 4*2 RHD road sweeper truck export to Democratic Republic of Timor-Leste

The road sweeper trucks manufactured are with 4 sets of sweeping brushes, Cummins auxiliary engine, Italian imported motor, Schneider Electric switches, Taiwan Solenoid valves, maintenance-free and self-disconnect type clutch, maintenance-free fan, stainless steel water tank, stainless steel wastes van, rear part LED arrow lamp, manual portable pump Emergency system, etc.  

The rotation mechanism of the front sweeper arm adopts high-tech rear-resistant work spacer sleeve, without buttering, precise cold-bending seamless hydraulic oil pipes, etc.

CLW brand RHD small road sweeper truck, adotps CLW brand truck chassis, RHD 4*2 single row driver cab, chaochai 95hp diesel engne, 5 speed transmission, 3300mm wheelbase, etc.

The overal dimension of the CLW brand RHD street sweeper truck is 5950×1995×2380mm. The street sweeper truck adopts JX493-G3 57KW 78hp anxiliary engine. 

1 main parameters
Product name			CLW RHD road sweeper truck	Remark
Product brand			CLW brand
Drive type			4*2 RHD, LHD is selective
Wheelbase			3300mm
Front/rear suspension			1032/1638(mm)
Engine model		Truck chassis engine	CY4102-C3F
		Auxiliary engine	JX493-G3
Output power		Truck chassis engine power	70KW
		Auxiliary engine power	57 KW
Max Gradient			30%
Emission standard			Euro Ⅲ
Outside-automobile noisy in the accelerating			≤84dB（A）, meeting the noisy of Second stage requirements
Max speed			95 km/h
Approach angle			19°
Departure angle			12°
Weight	Curb weight		4800 kg
	Max total weight		7300kg
Dimension	Overall dimension（L×W×H）		5950×1995×2380mm
	Mini ground clearance		240mm
Sucking and sweeping working	Sweeping efficiency		≥95%
	Max sucking granularity		120mm
	Sucking-sweeping width		2.8-3.0 m
	Max sweeping ability		60000 m2/h
	Extension dimension of dish brush		≥400 mm
	Sucking disk driving speed		3-20km/h
Tanker	Water tank volume		1.0-1.5m³
	Material		Stainless steel
Wastes van	Wastes van loading capacity		3.5-4.0m³
	Open angle of the discharging door		≥45°
	Material		Stainless steel
Hydraulic system	Type		Open-type, electronic-control
	Main units		Gear pump, hydraulic motor, hydraulic cylinders, solenoid valve,
	System pressure		16MPa
	Hydraulic oil tank volume		60L
	Oil temperature		60 ˚C
Electronic	Type		DC24V
	voltage		24V
	Storage battery		24V（2  sets of 12V in series）
Water sprinkling system	Main units		Electronic diaphragm pump, water filter, nozzles,
Sweeping disks device	Type		4 sets of sweeping disks middle-installed driving by hydraulic motor; The right-front one can work separately, with the function of dodge and repeat working
	Diameter		850mm
	Angle		ante version：4-6 °; extroversion: 4-7°
Sucking disk	Tyre		Single sucking, hydraulic-control, spring s
	Sucking diameter		200mm
Other device	Rear part		With LED arrow indication light

 More pictures of hot sale CLW Brand 4*2 RHD street sweeper truck as below 

Chengli Special Automobile Co., Ltd. is the leading manufacturer and supplier of sweeper truck in China. With many years' development, Chengli Special Automobile Co., Ltd could supply dongfeng sweeper truck, ISUZU sweeper truck, Forland road cleaning truck, JMC road sweeper truck, FAW street sweeper, etc. More information, please feel free to contact with Ms. Anita Deng.  

Website: www.truckdf.com

Mob.: +86 13886878855

Skype: truck0011

Whatsapp/wechat: +86 13329899995

QQ: 504873236 

2, spare parts of CLW RHD street sweeper truck as below 

Item	Name	Nos.	Remark
1	fire fighting hose	1	For adding water
2	fire fighting wrench	1	For disassembling fire hydrant
3	Manual rocker for hydraulic pump	1	For manual starting the hydraulic pump
4	Spare tyre（with the truck）	1

3, spare parts of CLW brand RHD 4*2 street sweeper truck as below 

Item	Name	Nos.
1	Brushing bristle	80
2	weather-strip of fan	1
3	weather-strip of rear door	1

4, imported device of CLW brand RHD road sweeping vehicle as below 

Items	Name	Model	Country
1	Hydraulic motor	BMR125	Item
2	Hydraulic valve	SWH-G02-C4-D2H	Taiwan